欢迎光临深圳拓源润滑油贸易有限公司 关于我们| 网站地图| 联系我们
全国统一服务热线
0755-33234402
当前位置:主页 > 润滑油中心 > 福斯润滑油 >

福斯FUCHS RENOLIN B3

文章出处:yahuku.com 人气:发表时间:2016-04-12 10:19

FUCHS RENOLIN B3高品质的HM液压油和CKC润滑油,功能和液压系统的工作可靠性很大程度上取决于使用哪个,除了transfering力,还必须密封,冷却和润滑的液压流体的质量。因为液压油是受到各种各样的应力,它们必须满足若干要求。这些必须保持整个油的使用寿命,必须帮助制止副产品不希望的反应的形成。所述RENOLIN B系列的油是基于高度耐老化溶剂棉子inates并履行,在许多点超越,根据ISO 6743-4作出HM液压油的最低要求。
 

应用:
 
该RENOLIN B系列油的不仅仅是优质液压油。他们还根据ISO 6743-6可用于多种应用,例如齿轮箱和轴承优良CKC润滑油。

 
优点:
 
良好的极压性,因而抗磨损保护;
良好的粘温特性;
优异的氧化稳定性和耐老化;
优秀的防腐蚀保护;
快速的空气释放性和低发泡;
良好的破乳特性;
良好的弹性体的相容性。
 
 

典型数据:
RENOLIN   B 3 B 5 B 10 B 15 B 20 B 30  
acc. to ISO 6743-4   HM 10 HM 22 HM 32 HM 46 HM 68 HM 100  
acc. to DIN 51 502   HLP 10 HLP 22 HLP 32 HLP 46 HLP 68 HLP 100  
Characteristics Unit             Test method
Colour   1 1 1 1.5 2 2.5 ASTM D 1500
Kinematic viscosity                
at 40 °C mm²/s 10 22.4 32 47 67 100 ASTM D 445
at 100 °C mm²/s 2.5 4.4 5.6 7.1 8.6 11 ASTM D 445
Viscosity index   61 105 114 109 99 94 ASTM D 2270
Density at 15 °C kg/l 0.85 0.865 0.88 0.88 0.882 0.888 ASTM D 1298
Flash point, Cleveland open cup °C 160 163 188 210 224 232 ASTM D 92
Pour point °C - 27 - 30 - 27 - 27 -24 - 21 ASTM D 97
Neutralization number mg KOH/g 0.3 0.3 0.3 0.3 0.3 0.3 ASTM D 974
Saponification number mg KOH/g 0.6 0.6 0.6 0.6 0.6 0.6 ASTM D 94
Oxide ash % mass 0.2 0.2 0.2 0.2 0.2 0.2 ASTM D 482
Water content % mass not traceable not traceable not traceable not traceable not traceable not traceable ASTM D 95
Insolubles % mass not traceable not traceable not traceable not traceable not traceable not traceable DIN 51 592
Demulsification min 15 15 15 15 15 15 DIN 51 599
Air release at 50 °C min 1 3 6 7 8 16 ASTM D 3427
Foaming,                
seq. I ml 35/0 5/0 20/0 10/0 20/0 10/0 ASTM D 892 seq. I-III
seq. II ml 10/0 10/0 20/0 40/0 30/0 30/0 ASTM D 892 seq. I-III
seq. III ml 35/0 5/0 20/0 10/0 20/0 10/0 ASTM D 892 seq. I-III
Copper corrosion degree of corr. 1a-100A24 1a-100A24 1a-100A24 1a-100A24 1a-100A24 1a-100A24 ASTM D 130
Rust prevention   pass A pass A pass A pass A pass A pass A ASTM D 665
FZG mechanical gear rig test load stage 12 12 12 12 12 12 DIN 51 354-2
Vickers vane pump test, loss of mass                
on ring mg < 120 < 120 < 120       IP 281
on vanes after 250 h mg < 30 < 30 < 30       IP 281
Effect on SRE-NBR 1 seal material acc. to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours, relative volume change                
change in Shore A % 15 7 5 5 5 5 DIN 53 521 together with DIN 53 505
hardness Shore - 2 - 1 - 1 - 1 - 1 - 1 DIN 53 521 together with DIN 53 505

 



此文关键字:福斯,FUCHS,RENOLIN,FUCHS,RENOLIN
展开